12V Car Jump Starter & Air Compressor with LED

Features:
-It has an inflation function that can inflate your standard car tire in seconds and automatically stops when full.
-With LED light, including 2 modes (normal, strobe,), which can be used in different emergency situations.
-With tire pressure monitoring, your tire pressure is shown on the display screen, making it convenient to check whether the tire pressure is in normal condition.
-It uses a large current of 1000A and can instantly start large-displacement vehicles. It is suitable for 12V vehicles.
-It can withstand environments of -10℃~85℃ and is not afraid of severe cold or scorching heat.
-In addition to being used as a car starting power source, it can also be used as a power bank to charge various electronic devices.

Note:
1. Please turn on the flashlight to discharge first, and then charge for more than 4 hours, because it contains virtual electricity, this process can extend the life;
2. It is recommended to start the car in the third gear or more than 60% of the power;
3. Check whether the battery terminal is clean;
4. Check whether the blue terminal is fully inserted, whether the clip contacts the positive and negative poles with the largest area of the battery, and whether the clip is stable and does not shake;
5. Clamp the positive and negative poles of the clip to the positive and negative poles of the battery, and wait for 2 to 3 minutes before starting the car, which can reduce the burden on the power supply;
6. Wait 30 seconds between each start before starting again;
7. The positive and negative poles cannot be reversed, and the two clips cannot be short-circuited;
8. Remove the clip within 30 seconds after successfully starting the car.